Trim Restore Kit - 3 oz

PRICE
$18.99
EA

Revitalize your ride with the Wipe New® Trim Restore Kit by Rust-Oleum, the ultimate solution for restoring the original color and shine to your vehicle's surfaces. Say goodbye to dull trim and enjoy a vibrant finish with unmatched protection against the elements.

 

• Ceramic Protection: Provides long-lasting defense against harsh weather.
• UV Shield: Prevents fading and keeps colors vibrant.
• Eco-friendly Formula: Free from silicones and oils, ensuring a clean application.
• All-in-One Kit: Includes ready-to-use wipes and gloves for easy application.


Cruise with a car that looks like new using the Wipe New Trim Restore Kit. With just one application, achieve a long-lasting, stunning finish that saves time and effort. Join car enthusiasts who trust Wipe New to keep their vehicles pristine and ready to impress on every drive!

 

Satisfaction Guaranteed: If you are dissatisfied with this product, contact Rust-Oleum Product Support at 888-822-3570 or click here to submit a request for product replacement or a full refund of the purchase price. Refer to product number and batch code.

Wipe New only ships within the continental United States. We do not offer shipping outside of the United States or to the U.S. Territories.

WARNING:  Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

SKU:
353616
UPC:
020066456320
Shipping:
Calculated at Checkout

Selected Quantity: 1

$18.99
$18.99
Adding to cart… The item has been added

ADD ON PRODUCTS:

Trim Restore Kit
(Inc. Tax)
(Ex. Tax)

RELATED PRODUCTS

IMPORTANT - Before you start, test Wipe New® on an inconspicuous spot to ensure the result is desirable as it will vary by material and surface damage. 

 

1. Tear open pre-saturated Prep Wipe (Do not open pouch with your teeth) and clean surface prior to product application. Clean thoroughly to ensure residue from any pre-existing restorative products are completely removed. If the surface is heavily soiled, wash the surface to be treated with car wash (free of wax, moisturizers or other additives) before using the Prep Wipe. Rinse and dry thoroughly. IMPORTANT: Ensure that no water remains on or around the surface to be treated. Dry thoroughly with a towel and let the surface air dry for at least 15 minutes. Open trunk and car doors and dry any excess water.  Any water left on the surface will cause streaking to occur.


2. Tear open pre-saturated Wipe New Wipe-It®. Do not open pouch with your teeth.

 

3. Apply in a single wipe to the intended surface with little or no overlap until the surface is completely coated.

 

4. Discard the applicator cloth when the application is finished or if it begins to dry during application.
 
NOTE: For badly faded and/or extremely porous surfaces, a second coat may be required for optimal results. If applicable, allow the first coat to dry for a minimum of 5, up to a maximum of 10 minutes, then immediately repeat steps 3 through 5.

INGREDIENTS

 Oxsol
Silicon Polymers
Cellulose Acetate Butyrate
Polyether Modified Polysiloxane

CAS #

 98-56-6
Proprietary
9004-36-8
Proprietary

FUNCTION

 Solvent
Durablilty and Shine
Resin
Flow Additive 

SDS
TDS

Is Wipe New® silicone based? 
Wipe New® is not silicone based. It is a colorless nano-polymer that can be used on any color surface. Wipe New® adheres to the surface to protect it against harsh elements like sun rays, rain, snow, salt, de­tergents, etc.  After proper treatment and curing with Wipe New®, dust will not easily adhere to the surface and will be very easy to wash off when it does. Make sure to thoroughly follow the instruc­tions during application for optimal results.
 
Is it ok to apply Wipe New® in direct sunlight and/or to hot surfaces? Will being out in the sun speed up the drying process? 
For best results, apply Wipe New® to a cool surface in a garage, carport or other shaded, well ventilated area. A hot surface or direct sunlight will speed drying too much and cause the surface to appear streaked. A second coat of Wipe New® will not resolve this issue.
 
What if I start applying and have to stop? Can I start again later? Will the results match?
Once you start applying Wipe New® to a surface, we recommend that you complete that entire surface before stopping (for example, if you start treating a bumper, finish the entire bumper before stop­ping). Stopping and starting again later on the same surface may lead to a visible difference in the final result due to variations in humidity, light, temperature, and other factors. If you must stop and start again later, try to stop at an inconspicuous spot on the surface.
 
How long does it take for Wipe New® to dry? What happens if the treated surface gets wet before it dries completely (i.e. morning dew, rain)? 
We recommend that you allow 1 hour of drying time before touch­ing the surface and a full 24 hours after applying Wipe New® before exposure to moisture of any kind. If the surface gets wet before Wipe New® cures, you may see streaking or spotting in the finish. A second coat of Wipe New® will not resolve this issue. For best results, we rec­ommend keeping the vehicle garaged for 24 hours after application.