Before & After Images
Wipe New Tires – Apply Once & Lasts 6 Months!
Specifically Formulated for Tires
Wipe New Tires is the first consumer tire dressing that features a nano-polymer, rather than silicon-based formula. This fundamental difference from competing brands results in a product with unmatched performance and durability. Wipe New Tires will last for 6 months or over 100 car washes, guaranteed! Another benefit to this technological innovation is that Wipe New Tires cures to a dry, non-greasy finish that doesn’t attract dust or pollen, won’t sling onto your car’s paint, and won’t crack, chip, peel or flake off. For customer testimonials search: #wipenew
Now Keep Your Tires as Showroom New as Your Car with Wipe New® Tires! Neither snow nor rain nor heat nor gloom of dozens of car washes will stop Wipe New® Tires from keeping your tires better than new for a full six months! It’s not only the best protection your tires ever had – it’s the fastest! – Just wipe it on and let it dry. Your tires will be protected from snow, slush and road chemicals all season long – and into the summer! Get protection from mud and muck, heat and sand along with all the normal dust and road grime. It all just rinses right off! Car enthusiasts and professional detailers alike wouldn’t pamper their expensive tire investments with anything else. Ordinary tire products are just surface coatings and don’t last. When they’re exposed to water, they basically wash right off. Wipe New® Tires applies quickly and evenly with our special applicator. Instantly, your tires will look great – even better than new! And you’ll get that newer-than-new look through a hundred car washes – WOW! Why? Because Wipe New® Tires is not a coating. It’s a proprietary formula that bonds to your tires, filling the pores and protecting deeper and more effectively than any other tire product. Don’t trust tire protection and luster to anything but Wipe New® Tires! Stop wasting time re-applying other products week after week for a shine that lasts a few days at best. Wipe New® Tires is the world’s longest lasting tire shine. Our revolutionary formula will keep your tires looking better than new through all conditions for 6 months after only one application!
Satisfaction Guaranteed – Wipe New Tires Will Perform As Promised For Six Months From Date of Purchase, Or Your Money Back (some exclusions apply – complete terms and conditions enclosed in each box).
No need to reapply after every wash – just rinse away dirt and grime to restore shine Proven to last over 100 car washes!
- Won’t crack, peel or wash away!
- Apply Once and it lasts 6 months!
- Lasts more than 100 Car Washes
- No Greasy Residue
- No Overspray or Sling
- Keeps Tires Clean Longer
- Provides UV Protection
- Made in USA
- No Silicone
- No Oils
- No Mess
Frequently Asked Questions
We recommend wearing the included gloves and using eye protection when applying Wipe New® Tires because once dry, it can be difficult to remove from your skin, and may irritate skin upon contact. In case of contact with skin, wash thoroughly with soap and water. In case of contact with eyes, hold eye open and thoroughly flush with water for at least 15 minutes. If irritation persists, seek medical attention.
For best results, apply Wipe New® Tires to a cool surface in a garage, carport or other shaded, well-ventilated area. While the sun does speed up the drying process, a hot surface or direct sun can speed drying too much and cause the surface to appear streaked.
We recommend that you allow 1 hour of drying time before touching the surface and a full 24 hours after applying Wipe New® Tires before exposure to moisture of any kind. If the surface gets wet before Wipe New® Tires cures, you may see streaking or spotting in the finish. A second coat of Wipe New® Tires will not resolve this issue. For best results, we recommend keeping the vehicle garaged for 24 hours after application.
Wipe New® Tires contains no dyes, however, it does harden as it dries and may damage your clothing.
Streaking may occur if 1) prior to beginning the surface has not been thoroughly prepped (cleaned with soap and water, free of greases/oils and dust particles), 2) the cloth begins to dry during application, 3) the treated surface is exposed to moisture within 24 hours of application, or 4) Wipe New® Tires was applied to a hot surface or in direct sunlight, causing it to cure at a faster, uneven rate. Streaking is also often the result of a porous tire surface unevenly absorbing Wipe New® Tires. To correct the streaking, wait 5 minutes after the coating to apply an additional coat evenly across the tire surface.
I sold detail products for cars for 15 years… Your wipe new for tires is one of the best products I have used. I put it on my convertible tires about 4 months ago as a test and the tires still look very acceptable. Thank you.Tom B.
Wipe New® Tires - Instructions
Prep and application instructions must be followed properly to ensure a successful and long lasting result.
Tire must be thoroughly cleaned and completely dry before application. V Keep applicator moistened with Wipe New® Tires throughout the entire application process.
Tire sidewall surfaces are porous by nature. The first coat of Wipe New® Tires will be absorbed into the surface to help “set” the surface for the 2nd coat. Older tires and tires with tall and/or softer sidewalls (truck/ SUV tires) will be more porous and require more Wipe New® Tires.
When applying Wipe New® Tires, wear the protective nitrile gloves and ensure you are outdoors or in a well ventilated area. Failure to wear protective gloves may result in injury.
Let Wipe New® Tires dry for 1 hour before driving vehicle and 24 hours before exposing to moisture (rain, dew, sprinklers, car wash, etc.).
Do not apply Wipe New® Tires to hot surfaces or in direct sunlight as this may cause uneven curing and streaking in the finish.
If Wipe New® Tires comes in contact with an unintended surface such as paint, wipe it off immediately with a dry cloth.
Store Wipe New® Tires in a cool, dry place and discard within one year of purchase.
Friction (ex: rubbing against a curb) will remove Wipe New® Tires.
For tips, video demonstrations, and more product information, check us out on:
View PDF Version of instructions.
Step 1: Thoroughly Clean your sidewalls
IMPORTANT: Thoroughly clean all four tires to remove all traces of soil, brake dust, silicone, and oxidized rubber before applying Wipe New® Tires; this will allow you to work quickly and without interruption once you begin your application.
Wet the tire and keep it wet while cleaning. Liberally spray the sidewall with a strong degreaser (pro tip: Westley’s Bleche- Wite®, which is specifically formulated for cleaning tires, is highly recommended). Using a stiff plastic brush, vigorously scrub the sidewall. Pay close attention to the edges of the tire treads, as well as the raised lettering and ribs as these are areas where dirt tends to cling and buildup. Rinse the sidewall, then wipe it with a clean white cloth. If black residue appears, repeat the cleaning process until the cloth no longer picks up any residue.
Step 2: Allow Tires to Dry completely Take a break! Your Tires must be 100% dry before proceeding to Step 3. Ensure there is no hidden water in areas such as the raised lettering, tire tread, on the rim, or the bead around the wheel that may drip out and run along the tire during or after application (pro tip: if available, a quick application of Isopropyl Alcohol with a lint-free rag will help remove any residual contaminants and further dry the surface).
Step 3: Apply Wipe New® Tires
Put on the chemical resistant gloves. Ensure that you are in a well ventilated area and that the tires are clean and completely dry. Saturate one edge of the microfiber applicator (included) and begin to apply Wipe New® Tires to your sidewalls. Work around the tire, ensuring that you also coat the raised lettering and textured areas. Apply one coat and proceed to the next tire, until all four tires have a single coat. After coating all four tires, pull the vehicle forward and apply Wipe New® to the portion of the tire missed during this first application. In most cases, you will see Wipe New® Tires partially absorb into the sidewall after the first coat has been applied, this is normal.
VERY IMPORTANT: Wait a full 5 minutes after applying the first coat before proceeding. Then, starting with the tire to which you first applied Wipe New® Tires, and following in the same order, apply a second coat to each tire. Ensure that the applicator is thoroughly saturated and apply the second coat at a slower pace to allow Wipe New® Tires to flow out and give a darker, smoother finish. Be sure to keep the applicator well moistened throughout the process.
If a higher level of gloss is desired, you may apply a third coat but make sure to wait a full 5 minutes between coats.
View PDF Version of instructions.