No products in the cart.
Before & After Images
Wipe the Years Away from Your Car!
Wipe New’s unique nano-polymer formula is the World’s Longest Lasting Solution for Restoring and Protecting your Vehicle! As of 2013, Wipe New Trim Restore has become the #1 Selling Trim Restore product in the USA, and in early 2014 was rated as the “Best Exterior Trim Cleaner” by the leading Consumer Magazine! For customer testimonials search: #wipenew
Until now, keeping your car looking like new involved applying and reapplying costly silicone based products, wasting tons of money and valuable time for only temporary cosmetic results. But now, with Wipe New®, those days are over!
Wipe New® is the revolutionary breakthrough solution for restoring a showroom new look to your vehicle’s interior and exterior! Wipe New® is safe and effective to use on plastic, rubber, chrome, vinyl, leather, acrylic, ceramic and metallic surfaces. Wipe New® not only restores the original sheen to faded interior and exterior trim, it protects most surfaces* from sun exposure, road salt, water spots, tree sap, and other harsh elements that eventually wear away that showroom new appearance. The Wipe New® unique formula works like no other to restore your vehicle’s trim in one quick, easy application and protect it with a durable finish that will last for years! With Wipe New®, a little goes a long way – 1.5 ounces is enough to treat the interior or exterior of the average mid-sized car! Plus, Wipe New® doesn’t have to be reapplied every time you clean your vehicle – it lasts season after season, so not only do you save money on other products, you also save valuable time!
- Best Performing Trim Restorer – Leading Consumer Magazine
- #1 Selling Trim Restore Product
- Apply once for lasting protection, even after hundreds of car washes
- Restores and protects from oxidation, fading and sun damage
- Provides UV Protection
- No Silicone, No Oils, No Mess
- Use on dashboards, door panels, leather and vinyl seats and trim
- Also use on plastic and rubber bumpers, trim, mirror housings, roof racks, grilles, cowls and more
- Non-greasy, no-slip formula is safe to use on steering wheels, running boards and more
- Enough for the interior or exterior of an average mid-sized vehicle
- Saves you both time and money
- Made in USA
Frequently Asked Questions
With Wipe New®, a little goes a long way. Since you only apply Wipe New® in a single wipe across the surface with very little overlap, 1.5 ounces is enough, in most cases, to treat the interior or exterior of an average mid-sized vehicle. If the surface is badly faded and/or porous, a second application may be needed for the best effect.
We recommend wearing the included gloves when applying Wipe New® because once dry it can be difficult to remove from your skin, and may also be slightly irritating to some people.
The headlight prep pad is used to remove heavy oxidation from the lens before applying Wipe New®. Simply rub the green side of the pad onto the lens in a back and forth motion, then rinse with water and dry. The pad has a very fine 2000 grit sand surface that gently removes the oxidation without damaging the acrylic. After prepping the headlight, apply Wipe New® according to package directions.
The sponge tip of the applicator brush will allow you to touch up small nooks and crannies around your headlights, grill inserts, rear view mirrors, interior HVAC vents, and other hard to reach areas. Simply dip the sponge tip into your Wipe New® bottle and apply in the desired area.
The two yellow cloths included in your Wipe New® Pro Detailing kit are specially designed to fit inside the palm of your hand for a better controlled application. The red cloth is slightly larger and can be used to apply Wipe New® to headlights or other surfaces. Both cloths allow for better absorption without waste, fraying or excess lint that can mess up your application; each will produce the same result so you can use the cloth that you find works best for your need.
Once you start applying Wipe New® to a surface, we recommend that you complete that entire surface before stopping (for example, if you start treating a bumper, finish the entire bumper before stopping). Stopping and starting again later on the same surface may, in some cases, lead to a visible difference in the final result due to variations in humidity, light, temperature, and other factors. If you must stop and start again later, try to stop at inconspicuous spot on the surface.
Wipe New® must cure for 24 hours prior to being exposed to any type of moisture including rain, puddles, dew, sprinklers, car washes, mist, etc. If a treated surface gets wet prior to the end of the 24 hour curing period, spotting or streaking may occur. We recommend keeping your vehicle in a garage or other covered area. Another option is to cover it with a car cover. Plastic disposable car covers may be available for purchase for a nominal fee from your local auto parts store.
Wipe New® contains no dyes, however, it does harden as it dries and may damage your clothing.
Wipe New® may create a “wavy” effect on glass or mirrored surfaces. If Wipe New® accidentally comes in contact with these types of surfaces, wipe it off immediately. Application to glass or mirrored surfaces is not an approved use for Wipe New® and the Wipe New® Protection Guarantee is not extended to the use of Wipe New® on glass or mirrored surfaces.
With proper surface preparation and application by a professional detailer in a proper setting, Wipe New® can be very effective on clear coat painted surfaces such as that on most motor vehicles. However, if the surface is not first thoroughly prepared applying Wipe New® will cause the finish to appear streaked. Application to a painted surface is not an advertised use for Wipe New® and is done so at the vehicle owner’s sole risk. Wipe New®’s Protection Guarantee does not extend to the use of Wipe New® on painted surfaces.
Although it is more easily removed if wiped from undesirable surfaces immediately, cured Wipe New® can be removed from paint using a small amount of polishing compound. We recommend that you apply the compound to a microfiber cloth then work it into the affected area in a circular motion. With a little time and effort the compound will remove Wipe New® from the surface, and you can use a clean microfiber cloth to wipe away any remaining compound residue. Use your preferred polish or wax to restore the shine to the affected area.
Wipe New® is guaranteed to last for two years on most surfaces, but may require reapplication over time to surfaces that are regularly exposed to oils from the skin and/or friction such as vinyl/leather car seats, steering wheels, gear shift knobs, etc.
You can use extremely fine high-grit sandpaper (such as 2000 or 3000 grit) to sand the surface and remove Wipe New®.
When Wipe New® begins to dry on the applicator cloth, streaking may occur during application. Make sure that the cloth is completely saturated and stays wet during the entire application process; the dry surface of the cloth should never touch a treated surface post-application. Streaking may also occur on surfaces that have not been thoroughly prepped (cleaned with soap and water, free of greases/oils and dust particles). Finally, if the treated surface is exposed to moisture within 24 hours of application; streaking may occur.
Yes. Wipe New® will restore shine to the surface, protect it from UV damage, and make it easier to clean. If there is any UV damage underneath the existing gel/clear coat, then Wipe New® will not remove it. Before applying, ensure the surface is thoroughly cleansed and allowed to dry completely, and protect the surface from moisture for 24 hours post-application.
As we do not carry a product to remove oxidation, we suggest that you prep and clean your fiberglass vehicles as you would normally do. Wipe your hand across the surface to make certain that there is no residue left. Before you apply Wipe New® (test in an inconspicuous spot); make sure the surface is completely DRY. Apply in indirect sunlight and protect the surface from moisture for 24 hours post-application.
Please don’t hesitate to contact us with any additional questions you may have. For tips and Wipe New® demos, visit the Avento Corporation channel on You Tube (YouTube.com/user/AventoCorporation), like us on Facebook (Facebook.com/WipeNew) and remember to share your before and after photos.
I used wipe new on my G35 over a month ago and it is still gleaming like a gem. This product is far greater than anyone knows. This is not the only car i have done, so i know this works on everything Michael M
Best product I have ever used!! My 2002 Sienna bumpers were white and faded. Now they are gray and look amazing!! It’s been raining for weeks and it still looks great. I would LOVE to sell this product myself. I’d make a fortune because I believe in it!! Melissa Barrett W
Well just put wipe new on my 2008 exterra and it looks better than the day we bought it!!!!!! I think its a wonderful product!!!! We will definitely be getting more for our other cars! I cant believe the difference it made!!!!! I love it! Jessica J
Wipe New® Original - Instructions
When applying Wipe New®, wear the nitrile gloves included with the Pro Detail Kit and always apply it in a well ventilated area.
Wipe New® is not recommended for glass. Application to clear coated or painted surfaces of a vehicle requires extensive preparation and should therefore be performed only by a automotive detail professional. See our paint application series on YouTube for more details.
Very little is needed! Only 1 to 1.5oz of Wipe New® is needed to coat the exterior trim on an average mid-sized sedan.
Plan to work from the highest area of your vehicle down. This helps keep freshly coated surfaces from being touched before they are dry.
Let Wipe New® dry for 1 hour before making contact with the treated surface.
Allow 24 hours after application before exposing treated surface to moisture (rain, dew, sprinklers, car wash, etc).
Do not apply Wipe New® to hot surfaces or in direct sunlight.
If Wipe New® comes in contact with unintended surfaces such as paint, wipe it off immediately with a dry cloth. Within an hour of application (while Wipe New® is still undergoing initial cure), Acetone can be used to remove Wipe New®. After Wipe New® has cured, removing it will require the use of a fine polishing compound or a high grit automotive sandpaper.
If Wipe New® begins to cure on the applicator cloth; you may notice a streaking in the surface. Either rewet the applicator cloth with more Wipe New® or discard the cloth and use a new one.
Store Wipe New® in a cool dry place and discard upon expiration.
View PDF Version of instructions.
Wash the surface to be treated with liquid dish detergent or car wash. Rinse and allow surface to dry thoroughly.
TIP: It’s important to ensure that no water remains on or around the surface to be treated. Gently tap the surface and adjacent surfaces. If water is present the tapping will make it run. Use a towel to dry up any excess water discovered during this process.
For best results, apply a degreaser to the surfaces intended for treatment and scrub thoroughly to ensure that residues from any pre-existing restorative products are completely removed. With the cap still affixed to the bottle shake the bottle for 10 seconds prior to opening. Pour Wipe New® slowly and carefully onto the yellow applicator cloth until the cloth is saturated. Apply in a single wipe to the intended surface with little or no overlap, from one row to the next until the surface is completely coated.
NOTE: for badly faded surfaces, a 2nd coat may be required for optimal results. If applicable, then allow the first coat to dry for 10 minutes then repeat steps 3 and 4.
TIP: After saturating the applicator cloth it is recommended that you fold it in half and then into a quarter. If the portion of the cloth becomes soiled then flip the fold to a clean portion of the cloth. Repeat throughout the application.
View PDF Version of instructions.
Using the blue/green headlight polishing block included with applicator kit, rub the untreated lens with the abrasive (blue/green) side of headlight prep pad to remove oxidation and contaminants; use back and forth motion over the entire lens until the surface is rough and has a white hazy appearance.
IMPORTANT: If your lens has a yellow tint then rub it until the yellow is removed. Rinse lens with water to remove all dust; allow the surface to dry thoroughly before beginning to apply Wipe New®. With the cap still affixed to the bottle shake the bottle for 10 seconds prior to opening. Pour Wipe New® slowly and carefully onto the headlight applicator cloth until the cloth is saturated.
Apply in a single wipe to the intended surface with little or no overlap, from one row to the next until the surface is completely coated.
View PDF Version of instructions.