WIPE THE YEARS AWAY FROM YOUR CAR!

Wipe New® Instruction Sheet

 

Congratulations on your purchase of Wipe New® the revolutionary breakthrough solution for restoring a showroom new look to your vehicle's interior and exterior!  Wipe New® is safe and effective to use on plastic, rubber, chrome, vinyl, leather, acrylic, ceramic and metallic surfaces.  Wipe New® not only restores the original sheen to faded interior and exterior trim, it protects most surfaces* from sun exposure, road salt, water spots, tree sap, and other harsh elements that eventually wear away that showroom new appearance. Wipe New®'s® unique formula works like no other to restore your vehicle's trim in one quick, easy application and protect it with a durable finish that will last for years! With Wipe New®, a little goes a long way - 1.5 ounces is enough to treat the interior or exterior of the average mid-sized car! Plus, Wipe New® doesn't have to be reapplied every time you clean your vehicle - it lasts season after season, so not only do you save money on other products, you also save valuable time!

 

Contents Include:

• 1 Bottle of Wipe New®

• 1 Pro Detail Kit, which includes:

2 Yellow Wipe New® applicator cloths

1 detail brush

1 pair of nitrile gloves

 

1 Headlight Applicator Kit, which includes:

• 1 Red headlight applicator cloth

• 1 headlight prep pad

 

Important Notes:

When applying Wipe New®, wear the nitrile gloves included with the Pro Detail Kit and always apply it in a well ventilated area.

 

Wipe New® is not recommended for glass.  Application to clear coated or painted surfaces of a vehicle requires extensive preparation and should therefore be performed only by a automotive detail professional. See our paint application series on YouTube for more details.

 

Very little is needed! Only 1 to 1.5oz of Wipe New® is needed to coat the exterior trim on an average mid-sized sedan.

 

Plan to work from the highest area of your vehicle down. This helps keep freshly coated surfaces from being touched before they are dry.

 

Let Wipe New® dry for 1 hour before making contact with the treated surface.

 

Allow 24 hours after application before exposing treated surface to moisture (rain, dew, sprinklers, car wash, etc).

 

Do not apply Wipe New® to hot surfaces or in direct sunlight.

 

If Wipe New® comes in contact with unintended surfaces such as paint, wipe it off immediately with a dry cloth.  Within an hour of application (while Wipe New® is still undergoing initial cure), Acetone can be used to remove Wipe New®.  After Wipe New® has cured, removing it will require the use of a fine polishing compound or a high grit automotive sandpaper.

 

If Wipe New® begins to cure on the applicator cloth; you may notice a streaking in the surface.  Either rewet the applicator cloth with more Wipe New® or discard the cloth and use a new one.

 

Store Wipe New® in a cool dry place and discard upon expiration.

 

 

For tips, demonstrations, and more product information, check us out on:

Facebook

http://www.facebook.com/WipeNew

YouTube

http://www.youtube.com/user/AventoCorporation

 

Trim Application Instructions:

 

Wash the surface to be treated with liquid dish detergent or car wash. Rinse and allow surface to dry thoroughly.

 

TIP: It's important to ensure that no water remains on or around the surface to be treated. Gently tap the surface and adjacent surfaces. If water is present the tapping will make it run. Use a towel to dry up any excess water discovered during this process.

 

For best results, apply a degreaser to the surfaces intended for treatment and scrub thoroughly to ensure that residues from any pre-existing restorative products are completely removed.

 

With the cap still affixed to the bottle shake the bottle for 10 seconds prior to opening.

 

Pour Wipe New® slowly and carefully onto the yellow applicator cloth until the cloth is saturated.

 

Apply in a single wipe to the intended surface with little or no overlap, from one row to the next until the surface is completely coated.

 

NOTE: for badly faded surfaces, a 2nd coat may be required for optimal results.  If applicable, then allow the first coat to dry for 10 minutes then repeat steps 3 and 4.

TIP: After saturating the applicator cloth it is recommended that you fold it in half and then into a quarter. If the portion of the cloth becomes soiled then flip the fold to a clean portion of the cloth. Repeat throughout the application.

 

 

Headlight Application Instructions:

 

Using the blue/green headlight polishing block included with applicator kit, rub the untreated lens with the abrasive (blue/green) side of headlight prep pad to remove oxidation and contaminants; use back and forth motion over the entire lens   until the surface is rough and has a white hazy appearance.

 

IMPORTANT: If your lens has a yellow tint then rub it until the yellow is removed.

 

Rinse lens with water to remove all dust; allow the surface to dry thoroughly before beginning to apply Wipe New®.

 

With the cap still affixed to the bottle shake the bottle for 10 seconds prior to opening.

 

Pour Wipe New® slowly and carefully onto the headlight applicator cloth until the cloth is saturated.

 

Apply in a single wipe to the intended surface with little or no overlap, from one row to the next until the surface is completely coated.

 

English Manual | Manual Español | Manuel Français

To open, download Adobe Reader here